摘要:安装配置文件新增账号编辑文件,允许新增账户访问新建访问根目录,并设置访问权限开启服务开机启动服务参考下安装服务器
安装vsftpd
yum -y install vsftpd
配置vsftpd.conf文件vi /etc/vsftpd/vsftpd.conf
# Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd"s # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). #anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd"s) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. idle_session_timeout=600 # # You may change the default value for timing out a data connection. data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. ascii_upload_enable=YES ascii_download_enable=YES # # You may fully customise the login banner string: ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). chroot_local_user=YES #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd with two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES userlist_deny=NO local_root=/var/www/html/ftp use_localtime=YES新增FTP账号
useradd hekui -s /sbin/nologin passwd hekui编辑user_list文件,允许新增账户访问FTP
vi /etc/vsftpd/user_list
# vsftpd userlist # If userlist_deny=NO, only allow users in this file # If userlist_deny=YES (default), never allow users in this file, and # do not even prompt for a password. # Note that the default vsftpd pam config also checks /etc/vsftpd/ftpusers # for users that are denied. root bin daemon adm lp sync shutdown halt mail news uucp operator games nobody hekui新建FTP访问根目录,并设置访问权限
mkdir /var/www/html/ftp chown -R cookie /var/www/html/ftp chmod -R 777 /var/www/html/ftp开启vsftpd服务
/bin/systemctl start vsftpd.service
开机启动FTP服务systemctl enable vsftpd.service
参考:Centos 6.5下安装vsftpd服务器
文章版权归作者所有,未经允许请勿转载,若此文章存在违规行为,您可以联系管理员删除。
转载请注明本文地址:https://www.ucloud.cn/yun/45914.html
摘要:匿名登录未授权访问漏洞复现漏洞简述匿名登录一般指使用的用户启用了匿名登录功能,容易被黑客攻击,发生恶意文件上传或更严重的入侵行为。禁止匿名登录服务添加一个新用户,并配置强密码。 FTP(匿名登录)未授权访问漏洞复现 0x01 漏洞简述 FTP匿名登录一般指使用FTP的用户启用了匿名登录功能,...
摘要:的前两个字母代表。项目官网安装使用安装如果需要连接其他服务器,则可以安装客户端。 关于 VSFTP 在 Linux 下搭建 FTP 服务器一般会使用 vsftpd。vsftpd 的前两个字母代表 very secure 。 项目官网:https://security.appspot.com/... 安装 VSFTP 使用 yum 安装 vsftpd: sudo yum install ...
摘要:安装配置做服务,我们的应用使用管理进行迭代,公共文件软件存储使用开源网盘来管理,基本够用。当,,,时,虚拟用户只能下载删除和重命名文件,无其他权限。而如果设置为则无法访问,这是由于的安全性设置。如果没有指定,将显示全部命令的列表。 安装配置vsftpd做FTP服务,我们的Web应用使用git管理进行迭代,公共文件软件存储使用开源网盘Seafile来管理,基本够用。想不到FTP的使用的场...
摘要:安装配置做服务,我们的应用使用管理进行迭代,公共文件软件存储使用开源网盘来管理,基本够用。当,,,时,虚拟用户只能下载删除和重命名文件,无其他权限。而如果设置为则无法访问,这是由于的安全性设置。如果没有指定,将显示全部命令的列表。 安装配置vsftpd做FTP服务,我们的Web应用使用git管理进行迭代,公共文件软件存储使用开源网盘Seafile来管理,基本够用。想不到FTP的使用的场...
摘要:安装首先要查看你是否安装显示也就安装成功了如果没有则安装完成后再检查一遍查看服务的状态如果是激活状态的话会有绿色的标记激活服务设置服务开机自启配置首先备份配置文件必须要备份,以免出现意外时恢复编辑配置文件,修改如下禁用匿名登录启用限 安装vsftpd 首先要查看你是否安装vsftp [root@localhost /]# rpm -q vsftpd vsftpd-3.0.2-10.el...
阅读 3177·2021-11-22 12:04
阅读 2493·2019-08-29 13:49
阅读 375·2019-08-26 13:45
阅读 2086·2019-08-26 11:56
阅读 836·2019-08-26 11:43
阅读 457·2019-08-26 10:45
阅读 1134·2019-08-23 16:48
阅读 2041·2019-08-23 16:07